The complete assembly ready to install on your machine. Top or bottom guides.
This assembly has the LongBlocks installed for running 1.5″ to 2″ band.
Available with either 3/4″ dia mounting rod OR 20.00mm dia rod can be supplied at any length you wish for no extra cost so when order please advise what length you require. We can always send out one an inch longer than needed its better than an inch shorter…
To help you work out how to retro fit these guides to another machine:
The blade center line needs to run 25mm or 1″ from center of the thrust wheel which is also center of the mounting rod. The guide assemble can be installed either way up so the blade line is either left or right of the mounting rod.
The backing plate is 98mm high x 74mm wide and the rod is centered top to bottom.
Sometimes a mounting block will have to be made up to mate up your large vertical Main Guide Post to the guide rod to gain the correct sideways offset.