The ultimate Vesper Try Squares. These sets have all infills cut from the same block of timber and kept together through the production process to not mix them up with general production. Production is very limited, we only do a small batch of sets once per year.
Available and in stock as of April 2019:
1 Set in Fiddleback and marbled Olive Wood.
1 Set in Conkerberry.
These top of the line sets are finished to the highest level possible by Chris Vesper himself. All care is taken with the details of finish on the brass, the timber infills, and the blades.
All three squares in these sets are of A+ grade accuracy or better, it is likely an A++ square or two will be part of any set at no extra cost.
That is a maximum deviation measured on outside edge of blade as follows:
4" +- 0.024mm
7" +- 0.042mm
10" +- 0.058mm
Timbers available to order, but not limited to include:
-10,000 yr old Black Red Gum.
-Tasmanian Blackwood (rich dark figured)
-Olive Wood (figured)
-Birds Eye Huon Pine
Any Dalbergia species (Brazilian Rosewood, African Blackwood, Cocobolo) is subject to import/export restrictions. CITES certification will have to be obtained at cost of the purchaser for any cross-border sales. All timbers used at Vesper Tools are pre ban. This precious resource should be used very sparingly and we feel that infills in tools that are destined for 100-200 plus years of use are fitting for these majestic timbers.
To select a timber when ordering please utilise the comment box with your request after you've added to cart.